Store:
Unimart
Feedback
Location:
-12%

PLA Filament MagicFil Thermo PLA 1.75mm Grey 500 gram 3D Printer Filament

V177-175THER-GRE-0500
AU$7800
AU$8900
You save: AU$1100
+
BUY IT NOW

Description

V177-175THER-GRE-0500_MagicFil-Thermo-PLA-Grey-175-500g__25526_1.jpg

MagicFil Thermo PLA is based on our EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29° C. MagicFil’s anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29° C or above. Being based on our EasyFil PLA compound make MagicFil Thermo PLA a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. MagicFil Thermo PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make it an extremely easy to print filament.

 Unique features

  • Colour changing ability from anthracite grey to natural PLA at 29° C
  • Anthracite grey colour < 29° C > natural PLA colour
  • Very easy to print
  • Warp-free printing and no deformation after cooling
  • Improved flowing behaviour and inter-layer adhesion
  • Good first layer adhesion to several (un)heated print surfaces
  • Slightly softer than standard PLA resulting in improved strength and impact resistance
  • Almost odourless processing/printing
  • Biodegradable

General Printing Guidelines

Nozzle size: ≥ 0.15mmLayer height: ≥ 0.1mmFlow rate: ± 100>#/td###
Print temp: ± 200 - 230° CPrint speed: MediumRetraction: Yes ± 5mm
Heat bed: ± 0 - 60° CFan speed: 50-100>#/td###Experience level: Beginner

Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.24 g/cc50 gr coil0.5 Kg spool
Ø 1.75mm± 16.8m± 168m
Ø 2.85mm± 6.3m± 63m

Product export information

HS CodeDescriptionCountry of origin
39169090MonofilamentNetherlands

 Compliance

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

More items from us

-20%
AU$1200 AU$1500
+