PLA Filament MagicFil Thermo PLA 2.85mm Grey 500 gram 3D Printer Filament

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers"}" data-sheets-userformat="{"2":513,"3":{"1":0},"12":0}">

MagicFil Thermo PLA is based on our EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29° C. MagicFil’s anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29° C or above.
Being based on our EasyFil PLA compound make MagicFil Thermo PLA a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. MagicFil Thermo PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make it an extremely easy to print filament.

Unique features

Colour changing ability from anthracite grey to natural PLA at 29° C Anthracite grey colour < 29° C > natural PLA colour Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable

General printing guidelines *

Nozzle size: ≥ 0.15mm

Layer height: ≥ 0.1mm

Flow rate: ± 100%

Print temp: ± 200 - 230° C

Print speed: Medium

Retraction: Yes ± 5mm

Heat bed: ± 0 - 60° C

Fan speed: 50-100%

Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers